Skip to content
  • Facebook
  • Instagram
509 Cycles

509 Cycles

  • Home
  • About
  • Products
    • Necessary Evil V2
    • Up An’ Atom
    • Necessary Evil Frame
    • Ti Jabit III Fat Bike Frame
    • Steel Jabit III Fat Bike Frame
  • Snow Crown Fat Bike Series
  • Blog
  • Dealers
  • Warranty
  • Contact

Tag: mtb

December 5, 2018December 5, 2018 509cycles

Review – Raceface Turbine R Dropper and Lever

The Fox Transfer dropper post is one of the most popular out there. Since Fox and Raceface are now under the same ownership, Raceface took the Fox transfer to rebrand under the Turbine R.This solved the issues that Raceface was having with other models of there dropper posts. But there are a few differences between … Continue reading Review – Raceface Turbine R Dropper and Lever

October 15, 2018 509cycles

Fresh TI Jabit graphics by Tempo Wraps!

I see David from Tempo wrapping or working on a design for a wrap daily. All sorts of eye catching wrapped bikes have gone out the shop doors in the past year. I patiently waited for the right time to say I want my Ti 509 Cycles Jabit wrapped and I want it loud. Here it is! … Continue reading Fresh TI Jabit graphics by Tempo Wraps!

October 12, 2017October 30, 2017 509cycles

29 Plus Forks: Manitou Mattoc Pro vs. Fox 34

There are two big contenders for 29+ forks. The Manitou Mattoc and the Fox 34 Plus fork, even though Fox does not advertise this fork as a 29+ there is plenty of clearance for it. Both forks have great features which we will go through below. Manitou Mattoc Pro Weight - 2012g Rotor - Post … Continue reading 29 Plus Forks: Manitou Mattoc Pro vs. Fox 34

October 8, 2017 509cycles

509 Win’s Single Speed Nationals!

A week before the race, our pro rider Pete Karinen said he wanted to race single speed on our Jabit III at nationals. We were all for it! So we ordered up the parts, which didn't show up on time. Then came plan B, we shipped the parts out to WV, where they almost didn't … Continue reading 509 Win’s Single Speed Nationals!

September 4, 2017September 4, 2017 509cycles

Tyler Finishes the Tour Divide!

Good news all around! Tyler finished tour divide in 22 days. Thanks for everyone who supported Tyler in any way on this journey. All the proceeds are going to the boys and girls club. Tyler along with Palmer Johnson Power Systems help raise $40,000!!! Bikepacker.com also shared some great photos of the divide this year … Continue reading Tyler Finishes the Tour Divide!

June 7, 2017 509cycles

509 on the Tour Divide

In two days our friend Tyler is setting off on a epic journey to take him across the continental divide. He will be taking the excursion on the Jabit III. Here is a blog on his bike setup that he will be using for the ride. We are pretty excited to be a part of … Continue reading 509 on the Tour Divide

May 9, 2017May 9, 2017 509cycles

Manitou Mastodon Fork

Our friends at Broken Spoke took some time to get some info out about the New Manitou Mastodon Fork. It’s been a long time coming for another big contender to come out with a suspension fat bike fork that can compete with the Bluto. While the Bluto was a good introduction, it is still pretty … Continue reading Manitou Mastodon Fork

January 17, 2017January 17, 2017 509cycles

Midwest Cycling Pod Cast

We had the privilege to be on the Midwest Cycling Pod Cast. We got to share a some background information about 509, about our bikes and just have a great time with Mark and Sean. Click here to listen to our podcast and to check out all the other great stuff that these guys have … Continue reading Midwest Cycling Pod Cast

January 13, 2017January 13, 2017 509cycles

The Jabit III

The Jabit III was the name of a B-29 plane that was flown in the 509 composite in WWII. The Boeing B-29 plane was one of the largest, most expensive and state of the art plane that was flying at that time. While our bike isn’t the most expensive on the market, it does follow … Continue reading The Jabit III

Instagram

Custom Necessary Evil v2 going out the doors and ready for some adventures!
The up an atom kicked up a notch on this build! Light weight ready for any kind of adventure!
Full send into the weekend with the new Necessary Evil Mark II at the Bear 100 and followed by WORS Iola with a 509 Ti hardtail SS. Let’s ride 🚀
Necessary Evil V2 frames are on there way! Bigger tire clearance, updated geometry and internal cable routing makes this v2 even more versatile! Small run of these frames so get your pre order in! 52cm - 58cm.
V2 necessary evils coming soon! Slacker, bigger tire clearance, internal cable routing, droppers. Everything a gravel adventure bike should be!
No detail or expense went overlooked on this build! Many miles will be had on this bike and look forward to seeing it in the wild!
Website Powered by WordPress.com.
  • Follow Following
    • 509 Cycles
    • Already have a WordPress.com account? Log in now.
    • 509 Cycles
    • Customize
    • Follow Following
    • Sign up
    • Log in
    • Report this content
    • View site in Reader
    • Manage subscriptions
    • Collapse this bar
 

Loading Comments...